How to Hang Large Wooden Framed Stained Glass Windows
The simplest way to hang a stained glass panel is to attach some hooks to the existing framework of the window and hang the stained glass with wire or chain. This is a good way for people who plan to move and want to take their window with them. The stained glass can be . Otherwise, stained glass window hanging can really fall down and break. Not to let this happen, we fix a special chain to the panel and then this panel will be hanged on a suction cup of a corresponding size. So, what we have to do, is to stick a suction cup to the window and hang the stained glass panel using the chain on the suction cup.
Stained glass windows are colorful and often beautiful, adding interest and vibrancy to your home. While you can install a stained glass window as a regular how to hang a stained glass picture, this makes it difficult to take the window with you if you ever move.
You can hang a stained glass window like a painting instead. However, large windows are heavy due to the glass and leading involved in their construction. You can hang a heavy window, but you should take a few precautions to be sure that both your home and the window are safe. Select an appropriate location for the window. Often, stained glass is installed in front of a regular window to let the light shine through, but you can hang it against a wall or hang it from the ceiling so that it hangs within a room.
Install hooks in the window's frame. If the piece has a metal frame, it will most likely already have hooks for hanging. If it does not, you will need to either add a wood frame or to solder some metal hooks to the frame. For a wooden what is required for a search warrant, bent hooks and roll hooks are good choices; these are both enclosed hooks which attach to the wood frame with screws.
Use at least two hooks, one on either end of the top of the frame or one on either side towards the how to make fondant animals step by step for an oval or round window. You can use more, and using more will distribute the weight of the frame better.
Use a what is a dirt dobber to make sure that you install the hooks symmetrically so that it hangs evenly. Locate the studs in the area where you would like to install the window. You can use a stud finder or tap the walls or ceiling and listen for a dull "thud" sound rather than the hollow sound of drywall. You must install the hooks for hanging your window in studs, which will be strong enough to hold it.
Drill pilot holes in the wall or ceiling for the hooks you will use to hang the window. Heavy eye hooks are a good choice, but you can potentially use bent or roll hooks or even cup hooks.
Use at least one hook for every hook on the window to distribute the weight amongst several studs. Install the hooks. Cup hooks and eye hooks are twisted into place, while bent and roll hooks screw into place. Use pieces of chain to hang the window frame hooks from the hooks in your wall or ceiling. Chain can often be opened with pliers and you don't usually need to cut chain.
By Rochelle Leggett. Related Articles. Ask someone to help you lift the window when you hang it. Stained glass windows are delicate and you could harm the window or yourself if you hang a window that is too heavy for you alone.
Hanging stained glass panels
Oct 07, · You will use it time and time again for hanging pictures, etc. Once those are marked, measure the distance between those studs according to the size of your window. Screw two eye hooks into those studs. Measure the distance between those two eye hooks and screw two eye hooks in the window the same distance apart. Hang the stained glass window in front of the original window by attaching the wires or chains to the hooks. The stained glass window does not have to be the same size as the window that it is being hung over. It can be much smaller and hung at the center of the larger window or it can be larger and hung over top of the smaller window. Jul 7, - Stained glass decor application. Ideas in how to decorate and incorporate stained glass in the home. See more ideas about stained glass panels, hanging stained glass, stained glass decor pins.
Expensive glass should be secure. Stained glass is no exception. Sturdy frames with adequate anchoring work together to ensure the glass remains in place on a wall, or above a doorway.
The key is understanding the framework, proper fasteners and placement. Display stained glass with pride and the knowledge that it will remain in place for years to come.
Stained glass is made up of hundreds of pieces. It's solid, but lacks the tensile strength of plate glass, thus wooden frames are typically required. There are two ways this type of frame is assembled. The first way -- which is the best -- is when the frame is assembled around the glass, centered inside a dado or channel. This ensures that the glass remains solidly in the frame indefinitely.
The second method is similar to glass on an exterior door, with strips of molding holding the glass inside the frame. Either method works fine, but the dadoed or channeled frame is stronger. Molding around the glass is weaker, but gives you the option of changing or removing the glass without destroying the frame. If the stained glass frame is to remain permanently in place, dadoed or channeled frames are best. Molded frames are the way to go if you ever want the option of changing the glass.
Find proper anchoring. Drywall inserts or expanding screws of almost any type are typically not adequate for hanging heavy wooden frames with stained glass. They might seem to hold, but they can loosen over time. When you're talking money, it's just not worth the risk.
Drywall won't support that kind of weight indefinitely. Use a stud finder to locate at least two studs before hanging the frame. They don't necessarily have to be centered, but there should be at least four screws into studs to ensure the integrity of the frame; two at the top, and two at the bottom, even if the top of the frame is arched.
Any kind of movement can be detrimental to stained glass, thus the need for fasteners on both ends. Screws or bolts should be long enough to penetrate into the studs to a depth of at least 1 inch. Use assistants to help you place the framed glass on the wall. Mark the stud locations on the frame. Drill holes centered through the frame, but be careful if the glass is dadoed into the frame. Use washers on both types. Antique brass washers look great, or use any other type of washer that compliments the frame.
Use your assistants to help you hold it in place. Use a socket and ratchet for lag bolts. If the wall is bent or crooked, don't force the frame to fit by bending it with the screws. This can result in broken glass. Put shims behind it if necessary. If your stained glass wooden framed window fits inside a rough stud frame, such as above a framed doorway, inside an alcove or anywhere architectural features allows the glass to fit inside, use the molding method to hang the widow.
Place the wooden framed glass inside the frame, pressed tightly against the molding perimeter. Follow up with another perimeter of molding or trim, sandwiching the framed glass inside the opening. That's how professional exterior door manufactures hang glass in doors. It remains changeable.
If it breaks, or you get tired of it and want something new, pry off the outer pieces of molding and take out the window. You've probably seen lots of picture frames hanging by wires, cord or twine. That might be fine for those items, but it's not recommended for expensive stained glass. However, if you have no other choice, you can brace the bottom of the framed glass by installing a ledger board on the wall.
This horizontal brace is screwed to the wall to support the weight of the framed glass. From here, hang the picture from the top from wires connected on both sides, but only if the wires, cords or twine are screwed to the back of the frame with washers and connected to wall studs. Unsupported glass frames run the risk of too much movement, resulting in the loosening of individual glass pieces.
Specializing in hardwood furniture, trim carpentry, cabinets, home improvement and architectural millwork, Wade Shaddy has worked in homebuilding since Shaddy has also worked as a newspaper reporter and writer, and as a contributing writer for Bicycling Magazine. By Wade Shaddy. Related Articles. I Was Framed Stained glass is made up of hundreds of pieces.
Anchors Aweigh Find proper anchoring. Screwing Around with Bits Use assistants to help you place the framed glass on the wall. Inside Job If your stained glass wooden framed window fits inside a rough stud frame, such as above a framed doorway, inside an alcove or anywhere architectural features allows the glass to fit inside, use the molding method to hang the widow. To Hang or Not to Hang You've probably seen lots of picture frames hanging by wires, cord or twine.
Writer Bio Specializing in hardwood furniture, trim carpentry, cabinets, home improvement and architectural millwork, Wade Shaddy has worked in homebuilding since